Table B-1: Commands Grouped by Function
Command or Command Group
rtcDateSet
rtcSetCurrent
setNettime
setTimeHost
tzSet
C
OMMANDS
This section describes the commands that are available to control, manage, and service the
SNC. The commands are listed in alphabetical order for easier reference.
Each command displays a status "value" in decimal and hexadecimal after execution and
before a new prompt is displayed. Usually a value of 0 indicates success, but some
commands may return a different value.
arptabShow
The arptabShow command displays the contents of the ARP table. The ARP table
contains the current Internet-to-Ethernet address mappings. This information may be
useful to the LAN administrator.
SN60023 > arptabShow
192.168.1.19 at 8:0:20:23:2f:db
value = 0 = 0x0
SN60023 >
cd
You can move to a different directory (usually in the flash file system) using the cd
command.
SN60023 > cd "MGMT"
value = 0 = 0x0
SN60023 >
arptabShow
Description
Manually set the Real Time
Clock
Synchronize the Real Time
Clock with the timeserver
Enable or disable
timeserver functionality
Add a host running
timeserver to the system
Set the time zone offset
from Greenwich Mean Time
Page
217
218
225
226
244
page 181