ADIC Scalar 100 User Manual page 248

SNMP community strings serve to group network devices into logical collections for
management purposes. The community string must match on both the ADIC Management
Console Server and the SNC you wish to manage. The default settings do match. Use the
ADIC Management Console to view or edit strings that apply to the Server. To view or
edit strings that apply to the SNC, use the snmp... commands explained below.
snmpHelp
The snmpHelp command displays a list of the snmp commands.
SN60023 > snmpHelp
snmpCommunitiesShow
snmpReadCommunityAdd "string"
snmpReadCommunityRemove "string"
snmpTrapCommunitySet "string"
snmpWriteCommunityAdd "string"
snmpWriteCommunityRemove "string"
trapDestAdd "ipaddress"
trapDestRemove "ipaddress"
trapDestShow
See User's Guide for more information
value = 0 = 0x0
SN60023 >
snmpReadCommunityAdd string [view]
" " ,
The snmpReadCommunityAdd command adds the specified string to the list of
accepted strings for SNMP Read operations (Get and GetNext). The View switch must be
set to "1" to be accepted by the ADIC Management Console.
SN60023 > snmpReadCommunityAdd "pathlight",1
Success
value = 4 = 0x4
SN60023>
snmpReadCommunityRemove string
" "
The snmpReadCommunityRemove command removes the specified string from the
list of accepted strings for SNMP Read operations.
SN60023 > snmpReadCommunityRemove "pathlight"
Success
value = 3 = 0x3
SN60023 >
page 234
snmpHelp