Introduction; Requirements - ADIC DAT 160 Installation And Operating Manual

Introduction

adic
has designed the DAT Autochanger for high-capacity, near- and off-line storage
applications, such as backup, hierarchical storage management (HSM) and
video/design/data file libraries. For the most part, installation is simply a matter of
checking all necessary SCSI connections, installing the software and applying power.
The defaults set at the factory should be sufficient for most applications.

Requirements

p Space requirements: The DAT Autochanger has a footprint of 17" x 13.5". You
must allow adequate clearance to the rear and sides (2 inches minimum) to allow
airflow and enough room at the front to open the door (which stands 8" high and
is hinged at the bottom).
p Host computer system: We assume that you are familiar with your host computer
system. The DAT Autochanger is controlled by backup software running on your
2
Getting Started