ADIC Scalar 100 User Manual page 124

Otherwise, if you have changed Channel Zoning settings to create restricted access zones,
confirm that you want to keep those settings and restrictions. If you want to keep those
settings, go to step 2.
You can use a combination of Channel Zoning and SFM but SFM can only control access
permissions between devices in the same access zone. See the section on "Combining
SFM with Channel Zoning". You may want to consider removing Channel Zoning access
restrictions. If you do, you need to reboot the SNC after changing the settings.
2. If the ADIC Management Console Server and Client are already running and you are
already logged in with administrative privileges go to step 3. If not, start the Server
and Client, login as the administrator and connect to the ADIC Management Console.
3. From the ADIC Management Console, select the SNC. From the Controls menu,
select Feature Enable > Scalar Firewall Manager.
4. In the dialog box, enter the License Key for your specific SNC.
5. Install the Host Registration Service on each host. See "Installing the Host
Registration Service" on page 100.
6. After the hosts have finished booting, from the ADIC Management Console, select
the SNC. From the View menu, select Refresh SNC 5101 Data.
page 110
Note: If you need to reboot the SNC, SFM will not be able to inherit host
access permissions. You will have to manually assign access for them. If this
is the case, exit this procedure and go to the section "Installation Steps for a
New SNC" on page 102.
Note: If this feature is factory enabled, you can activate it by simply entering
the word enable rather than an actual license key.
Note: If you do not install the Registration Service you have to enter host
parameters manually. See "Entering Host Parameters" on page 114.
Installing Scalar Firewall Manager