54. Unless you have selected a SCSI channel in Tree View, the SCSI Channel option will
be grayed out.
Figure 3-54: Right-Click Menu: SCSI Channel Parameters
Figure 3-55: SCSI Channel Controls: Target to Initiator
The SCSI Channel settings window gives you the opportunity to change a number of
different settings. See Figure 3-55.
Channel Mode identifies the channel as either an Initiator or a Target.
Host ID is typically assigned as 7.
page 80
Attention: If you change any of the SCSI Channel Parameter settings, you
have to reset the SCSI channel or reboot the SNC to use the new settings.
Controls Menu Group