ADIC Scalar 100 User Manual page 236

SN60023 >
scsiResetDisableSet [channel],[mode]
The scsiResetDisableSet command sets the SCSI Bus Reset On Power Up for the
specified SCSI channel. False is default and enables reset of SCSI bus on power-up, True
disables SCSI bus reset on power-up.
Channel Number
Mode
SN60023 > scsiResetDisableSet 1,1
Reset Disable set to TRUE for SCSI 1
will take effect upon reboot
value = 0 = 0x0
SN60023 >
scsiShow
The scsiShow command displays all SCSI channels and information about the devices
attached to each channel. The following example shows the display for two disk devices
attached to SCSI Channel 1 and a tape library attached to SCSI Channel 2:
SN60023 > scsiShow
SCSI Initiator Channel 1: 0xc08b5b60
ID LUN Vendor Product
--------------------------------------|------------
1 0 OEM OEM DCHS04X
2 0 OEM OEM DCHS04X
SCSI Initiator Channel 2: 0xc08d26e0
ID LUN Vendor Product
--------------------------------------|------------
0 0 OEM
0 1 OEM
1 0 OEM
value = 0 = 0x0
SN60023 >
page 222
Parameter Value
1 - 4
0
1
Rev | Sync/Off Width
6363 | 12/15 16 S W
6363 | 12/15 16 S W
Rev | Sync/Off Width
03570C12 5346 | 25/15 16 S W
03570C12 5346 |
03570C12 5346 | 25/15 16 S W
ID The SCSI ID of the target device
LUN The SCSI LUN of the target device
Meaning
Selected Channel
Enable Reset on Power Up
Disable Reset on Power
Up
0/ 0 8 S W Q
0/ 0 8 S W Q
0/ 0 8 S W
0/ 0 8 S W
scsiResetDisableSet [channel],[mode]