ADIC Scalar 100 User Manual page 256

tcpstatShow
The tcpstatShow command displays TCP statistics for the Ethernet network.
Interpreting these statistics requires detailed knowledge of Internet networking protocols.
This information may be useful to the LAN administrator.
SN60023 > tcpstatShow
TCP:
301 packets sent
278 data packets (18371 bytes)
0 data packet (0 byte) retransmitted
23 ack-only packets (22 delayed)
0 URG only packet
0 window probe packet
0 window update packet
0 control packet
516 packets received
272 acks (for 18372 bytes)
1 duplicate ack
0 ack for unsent data
276 packets (322 bytes) received in-sequence
0 completely duplicate packet (0 byte)
0 packet with some dup. data (0 byte duped)
0 out-of-order packet (0 byte)
0 packet (0 byte) of data after window
0 window probe
0 window update packet
0 packet received after close
0 discarded for bad checksum
0 discarded for bad header offset field
0 discarded because packet too short
0 connection request
1 connection accept
1 connection established (including accepts)
1 connection closed (including 0 drop)
0 embryonic connection dropped
272 segments updated rtt (of 272 attempts)
0 retransmit timeout
0 connection dropped by rexmit timeout
page 242
Vendor The content of the Vendor ID field from the SCSI
Inquiry Data
Product The content of the Product ID field from the SCSI
Inquiry Data
Rev The content of the Revision ID field from the SCSI
Inquiry Data
Type Specific For each device type, information pertinent to the device
tcpstatShow