userAdd
username
,
password
"
"
"
"
The userAdd command adds a user and password to the password file. The parameter
"username" must be from 3 to 80 characters. The parameter "password" must be from 8 to
40 characters.
SN60023 > userAdd "nancy","password"
value = 0 = 0x0
SN60023 >
userDelete
username
,
password
"
"
"
"
The userDelete command deletes a user from the password file. It is not possible to
remove a user without knowing the user's password. If the user's password is forgotten or
unknown, you have to delete the password file, reboot the SNC, and then add all user
names and passwords again.
SN60023 > userDelete "nancy","password"
value = 0 = 0x0
SN60023 >
userList
The userList command displays the contents of the password file (passwords are
encrypted).
SN60023 > userList
Name : Password
nancy : SyecycRz
fred : b9dczebQbd
martha : RQQdRedb9d
user : cScQRSQzzz
value = 0 = 0x0
SN60023 >
userHelp
The userHelp command displays a list of the user commands.
SN60023 > userHelp
userAdd "name","password" - Add user to user list
userDelete "name","password" - Delete user from user list
page 245
userAdd "username","password"