ADIC Scalar 100 User Manual page 183

A
DDING A
1. To enable the timeserver functionality use the setNettime command. See the
"setNettime [value]" command on page 225):
SN60023 > setNettime 1
Nettime 1 value = 0 = 0x0
SN60023 >
2. Add a Host running timeserver to the SNC using the setTimeHost command. See
the "setTimeHost" command on page 226:
SN60023 > setTimeHost "butter"
Time Host butter value = 0 = 0x0
SN60023 >
3. Set the remote system as the source of date/time display using the rdate command.
See the "rdate "timeserver"" command on page 215:
SN60023 > rdate "butter"
Get time from butter using UDP/SNTP
value = 0 = 0x0
SN60023 >
4. Use the tzSet command to set the timezone. EST is used in the example for Eastern
Standard Time.
SN60023 > tzSet "EST" TZ Set TIMEZONE =
EST:EDT:300:040202:101502 value = 0 = 0x0
SN60023 >
5. To confirm, use the date command:
SN60023 > date WED JUL 18 14:51:59 2001 value = 0 = 0x0 SN60023
SN60023 >
D
ISABLING THE
1. To disable the timeserver functionality, use the setNettime command:
SN60023 > setNettime 0
Nettime 0 value = 0 = 0x0
SN60023 >
2. The time will revert to the time set on the SNC's Real Time Clock.
Updating Firmware and Configurations
H S R
OST YSTEM UNNING
T H
IMESERVER OST
T
IMESERVER
page 169