Table of Contents
Advertisement
Appendix A
SCSI terminator specifications
You can use one of the following types of terminators:
Differential external terminator
S When the library is equipped with AIT-1 drives, or AIT-2 drives
S When the library is equipped with AIT-2 drives operating in LVD
Power cord requirements
The library includes an appropriate power cord for United States and
Canada shipments, and for some international shipments.
United States and Canada
The library is shipped with a seven-foot (2.1 meter), three-conductor AC
power cord for 120-volt use in the United States and Canada. If you plan
to use a 220-volt AC power cord, make certain it meets the following
criteria:
S A molded NEMA 6-15P attachment plug on one end and a molded
S An SJT or SVT type, three-conductor, 18 AWG minimum
S Compliance with local electrical code
160
operating in HVD mode, use ADIC p/n 61-1140-01A
mode, use ADIC p/n 61-3020-01
IEC type CEE-22 female connector on the other end
Scalar AIT 440/480
Advertisement
Table of Contents
