Introduction; Requirements - ADIC VLS DLT Installation And Operating Manual

Virtual vibrary system
Table of Contents

Advertisement

Introduction

Requirements

2
Getting Started
ADIC has designed the Virtual Library System (VLS) for
high-capacity, near and off-line storage applications, such as
backup, hierarchical storage management (HSM) and
video/design/data file libraries. For the most part,
installation is simply a matter of checking all necessary
SCSI connections, installing the software (backup or
otherwise) and applying power. The defaults set at the
factory should be sufficient for most applications.
8.0 in.
20.3 cm
20.0 in.
50.8 cm
Figure 1: VLS Dimensions
p
Space requirements: the VLS footprint is 17.4" x 20.0" x
8.0". You must allow adequate clearance to the rear (2
inches or more) and bottom (do not place on carpeting)
to allow air flow. Also allow enough room at the front to
open the door (which is 8" high and hinged at the
bottom).
17.4 in
44.2 cm

Advertisement

Table of Contents
loading

Table of Contents