ADIC Scalar 100 User Manual page 247

sncFeatureEnable "licensekeystring"
The sncFeatureEnable command enables the optional Data Mover feature. You
enable the feature by entering the unique license key.
SN60023 > sncFeatureEnable "BVRXC-G79DN"
value = 0 = 0x0
SN60023 >
SN60023 > sncFeatureEnable "enable"
value = 0 = 0x0
Data Mover License is Valid
SN60023 >
If value = 1 = 0x1 message is displayed, it means the license is already installed
and Data Mover is already enabled.
If the value = -1 = 0xffffffff message is displayed, it means the license is
not already installed and you do need to enter the license key.
snmpCommunitiesShow
The snmpCommunitiesShow command displays the list of SNMP community strings
in use by the SNC.
SN60023 > snmpCommunitiesShow
ReadCommunity
-----------------------------
pub
ReadCommunity
-----------------------------
public
icmp
WriteCommunity
-----------------------------
priv
private
TrapCommunity
------------------------------
private
value = 9 = 0x9
SN60023 >
sncFeatureEnable "licensekeystring"
Note: You can also activate Data Mover by simply entering the word enable
rather than an actual license key.
ViewIndex
1
ViewIndex
1
2
ViewIndex
1
1
page 233