ADIC Scalar 100 User Manual page 218

hostShow
The hostShow command displays the IP address and alias (if any) of the unit processing
the hostShow command, the localhost and the timeserver host.
SN600012 > hostShow
hostname
--------
SN600012
localhost
host
value = 0 = 0x0
SN600012 >
hostTypeShow
The hostTypeShow command displays the host type setting for each Fibre Channel.
The possible host types are AIX, AS400, Gateway, ADIC SNC, HP-UX, Linux, NT
(includes Windows 2000), Netware, Gateway, Generic, Solaris, Autosense/NT, or
Dell PV-136T-FC.
SN60023 > hostTypeShow
FC 1: Type 2 – nt
FC 2: Type 1 – solaris
value = 0 = 0x0
SN60023 >
The output in this example could result from the user's having chosen either "Solaris" or
"Linux" as the the host type for the host attached to FC2.
icmpstatShow
The icmpstatShow command displays ICMP statistics for the Ethernet network.
Interpreting these statistics requires detailed knowledge of Internet networking protocols.
This information may be useful to the LAN administrator.
SN60023 > icmpstatShow
ICMP:
0 call to icmp_error
0 error not generated because old message was icmp
0 message with bad code fields
0 message < minimum length
0 bad checksum
0 message with bad length
Input histogram:
destination unreachable: 1
page 204
inet address
------------
192.168.1.172
127.0.0.1
192.168.1.127
aliases
-------
hostShow