The Connect option of the Tools menu is one of two ways to connect to a particular SNC.
You can also right-click the SNC in the Tree View display. See Figure 3-27. Scroll down
to the Connect option, which is the second choice in the right-click menu.
Figure 3-27: Right-Click Menu: Connect
Disconnect
The Disconnect SNC 5101 menu choice ends your connection to the selected SNC and
removes it from the display. The ADIC Management Console asks you to confirm that you
want to break the connection. See Figure 3-28. If you perform a Save Current View, after
answering Yes, the SNC you disconnected from is removed from the view you are saving.
Figure 3-28: Disconnect
The Disconnect option of the Tools menu is one of two ways to disconnect from a
particular ADIC Management Console. You can also right-click the SNC in the Tree View
page 62
Tools Menu Group