Routine operation
8.8
Measurement results
8.8.1
Result presentation
8.8.2
Print measuring result
Manual printing
The measured result is displayed with the unit and the sample number.
If an alarm profile (METHOD > Set.) is set, the results are checked to determine whether
they are within the upper and lower limits. If the results are outside the limits, they are
labelled as follows:
Results below the lower limit
value
Results above the upper limit
value
If a printer (serial ASCII, network or PDF file) is configured, the measurement result can be
printed manually using the key Print:Resultor automatically directly after the measurement.
For a description of how to configure the printer, see the chapter System menu > Tab
Printer.
1. Press the Printer key.
78
-------
++++