Set Date; Set Time; Select The Date And Time Format; Adjust Screen Brightness - kruss DS7000 Series User Manual

10.1.3

Set date

This is the procedure
10.1.4

Set time

This is the procedure
10.1.5

Select the date and time format

This is the procedure
10.1.6

Adjust screen brightness

This is the procedure
10.1.7

Select temperature unit

This is the procedure
1. Click SySTEM > EDIT > Date.
The date selection calendar opens.
2. Click on the current date.
3. Save the selection by pressing OK.
1. Click SySTEM > EDIT > Time.
The selection menu opens.
2. Select the hours, minutes and seconds.
3. Save the selection by pressing OK.
1. Click SySTEM > EDIT.
2. Open the selection menu Date format and/or time format.
3. Select the Date format and/or time format.
4. Save the selection by pressing OK.
1. Click SySTEM > EDIT > LCD brightness.
2. Change the brightness with the slider.
3. Save the selection by pressing OK.
1. Click SySTEM > EDIT.
2. Open the selection menu Temperature measurement and choose the temperature
unit
3. Save the selection by pressing OK.
4. Select the relevant settings using the selection lists and save the selection by pressing
OK.
141
System menu