Define Sample Series For Auto Sampler; Start-Up Behaviour Without Temperature Control; Start-Up Behaviour With Temperature Control - kruss DS7000 Series User Manual

Routine operation
8.2.8

Define sample series for auto sampler

8.2.9

Start-up behaviour without temperature control

8.2.10

Start-up behaviour with temperature control

Stabilisation period
After pressing the Measure key, the dialog box opens for entry of the sample series and
sample numbers.
1. Input the name of the series directly.
or
2. Activate Automatic to name the sample series automatically.
3. Enter the first and last sample number of the sample series.
4. Press START to begin the measurement.
If the system is not set to temperature control (METHODS > Temp.), the temperature is
not controlled.
The measurement is begun immediately using the MEASURE KEy.
If temperature control is switched on (METHODS > Temp.), the temperature is
checked. The MEASURE KEy can be pressed at any time. The measurement only begins
automatically when the intended temperature is reached.
If a stabilising period (METHODS > Temp.) is entered, the measurement is begun
automatically after this period has passed.
64