6.2.4
Acid-resistant hoses for manual filling with a Luer syringe
The hoses must be installed as follows:
1. Screw the filling hose into the infeed piece (1)
2. Screw the drain hose into the drainage piece (2)
1
Infeed piece
2
Drainage piece
For working with the Luer syringe, an adapter (3) must be screwed into the infeed piece
(1).
1. Screw the adapter (3) into the infeed piece (1)
2. Screw the drain hose into the drainage piece (2)
1
Acid-resistant infeed piece
2
Drainage piece with acid resistant draining hose
3
Adapter for the Luer syringe
39
Installation
1
2
1
2
3