Table of Contents
Advertisement
Installation
6.5
Install DS7000 with drying unit DS7060 and peristaltic pump
6.5.1
Establish hose connections for DS7060
6.5.2
Connect peristaltic pump DS7070
On delivery, the drying unit mentioned in the order, including a cartridge with silica gel
and the infeed and drainage pieces are already installed. All that remains is for the
peristaltic pump and the hoses to be connected.
Important note!
If the silica gel is discoloured, it can no longer absorb any moisture and must be
renewed. Replace the silica gel as described in the Maintenance chapter.
1. Connect the hoses as shown in the overview.
drain tube
sample/rinsing liquid
1. Attach the connecting cable from the peristaltic pump to the density meter
42
connecting tube
DS7060
filling tube
waste tube
waste
Advertisement
Table of Contents
