Connect Printer; Connect Network Printer - kruss DS7000 Series User Manual

6.6

Connect printer

6.7

Connect network printer

1. Connect the printer to the serial interface (1).
2. Connect the printer's mains cable to the power supply.
3. Configure the printer in the menuSySTEM > Tab Printer > Printer selection >Serial
ASCII printer.
To transmit the measurement results to the network printer:
1. Connect the network printer to the density meter (1) using the network printer cable.
Configure the network printer in the menu SySTEM > TabPrinter > Printer selection
>network printer.
43
Installation