Table of Contents
Advertisement
8.6.4
Clean frequency oscillator with Autosampler
8.7
Autosampler operation with firmware version 7.215 and above
8.7.1
Start sample series menu
Cleaning is described in detail in the chapters Initial start-up and Methods menu.
Between samples, the frequency oscillator is cleaned automatically as defined in the
method.
Cleaning is described in detail in the chapters Initial start-up and Methods menu.
With firmware version 7.215, the operation of the autosampler via the software has been
improved and expanded. It is now possible to define the exact measurement sequence
without templates, to pause the sample series and to edit it in the paused state, as well as
to measure previous sample series.
All new and revised features are described below.
If the sample feeding is set to autosampler in the currently selected method, the
autosampler is activated and no templates are used, the Start sample series menu is
accessible via the measurement button in the main menu.
The name of the sample series can be edited in the Start sample series menu.
Automatically, a new sample series is given a name which corresponds to the format
yyyyMMDD_hhmmss. yyyy stands for year, MM for month, DD for day, hh for hour, mm
for minute and ss for second. This name can be edited.
71
Routine operation
Advertisement
Table of Contents
