Routine operation
By clicking the Cancel button, the sample series is aborted and discontinued.
8.7.7
Autosampler operation with activated templates
If in the currently selected method the sample feeding is set to autosampler, the
autosampler is activated and templates are used, the Configure sample series menu
appears directly in the main menu via the measurement button.
In the Configure sample series menu, all entries of the template are displayed in the table
of the measuring sequence.
The editing of the name of the sample series and the measuring sequence is performed in
the same way as in the autosampler operation without the use of templates.
When using templates, only previous sample series created with the selected template can
be recalled.
It is not possible to recall previous sample series that originated from another template.
It is not possible to recall previous sample series that were created while templates were
deactivated.
77