Filter Results According To Time Period; Select Time Period - kruss DS7000 Series User Manual

Result
11.4

Filter results according to time period

11.4.1

Select time period

This is the procedure
3. Use the arrow key to move the marked field into the Selected fields pane.
4. Save the selection by pressing OK.
The target temperature will be displayed in the results list.
Display/keys Explanatory notes
Available fields Displayed here are the remaining available fields which were
not selected for the output.
Selected fields Selected fields are displayed for the results output.
Moves the highlighted field up/down in
the order of the results columns in the results output.
Moves the highlighted field to the other window, left or right.
One-shot
measurements
All fields
output and are moved into the right-hand window.
Resets the Selected fields to the standard selection.
The settings are confirmed, the dialog box closes and the
results menu opens.
The dialog box closes without saving the input and the result
menu opens.
To select a time period in the results list, a Start value and an End value are determined
as required.
1. Press RESULTS.
2. Double-click on the first result row to be shown.
The following selection window opens:
179
activated.
activated. All available fields are selected for the results
Results menu