Cleaning Procedure Modules - kruss DS7000 Series User Manual

Open dialog box
Explanatory notes
9.8.1

Cleaning procedure modules

1. Click on METHODS > Tab Cleaning > EDIT.
Parameters
Cleaning procedure
Keys
Modules/steps
DS7070 Peristaltic
pump
117
Explanatory notes
Selection menu:
• none
• already defined cleaning procedures and factory-defined.
• -Manage cleaning procedure- to define
cleaning procedures.
The settings are accepted, the method menu is closed and
the start menu opens.
The method menu closes without saving the entry and the
start menu opens.
Deletes the current method.
Creates a new method
Explanatory notes
The following must be defined for the peristaltic pump:
• Time [s]
• Direction of rotation (clockwise/anticlockwise)
• Revolution speed [1/min]
• Auto-confirmation
– activated: once rinsing is complete, the next cleaning
module will automatically be performed.
– deactivated: once rinsing is complete, you will be
prompted as to whether the next cleaning module
should be performed.
Methods menu