Reset Existing Filter; Export Results - kruss DS7000 Series User Manual

11.6.8

Reset existing filter

This is the procedure
Result
11.7

Export results

An active filter can be reset at any time without the filter being deleted from the filter list.
1. Press RESULTS > FILTER.
The filter selection dialog box opens.
2. Click on RESET FILTER.
The active filter is reset and all of the results in the result list are displayed again.
All individual or filtered measurement results can be transferred to a USB stick.
1. Connect the USB stick to the device.
2. Press RESULTS to open the results list.
3. Filter the required results via > FILTER.
4. Press ExPORT and select the export format (CVS/HTML file).
5. Give the export file a different name from the one suggested where necessary.
6. Save the entry by pressing OK.
The export takes place. The selected results are exported to the USB stick in the selected
format.
Important note!
Remove the USB stick only after export is complete. Only then are the exported
results securely saved on the USB stick.
189
Results menu