Preparing The Measurement; Introducing The Sample - kruss DSA100 Installation And Operation Manual

page 74
11.6

Preparing the measurement

11.6.1

Introducing the sample

Safety note
WARNING
Risk of burns
There is a risk of burns when opening and closing the sample drawer.
Wear heat-resistant protective gloves.

Avoid touching hot components.

Procedure
1. Remove the screw on the right-hand side.
!
If a tilting table is used, the sample drawer must be secured with the screw
once more when the sample has been introduced.
2. Open the sample drawer.
Environmental chambers TC30 and TC40