Disable/Release Methods; Configure Peristaltic Pump Ds7070; Select Sample Feeding - kruss DS7000 Series User Manual

9.9.2

Disable/release methods

Objective
This is the procedure
Result
9.10

Configure peristaltic pump DS7070

9.10.1

Select sample feeding

you can disable/release access for any method.
1. Click on METHODS > Tab Opt. > EDIT.
The measuring options are displayed.
2. Activate and/or deactivate the option Disable method.
3. Save the settings by pressing OK.
The method is/is not available in the selection menu METHOD > Name .
The peristaltic pump transports the presented sample into the frequency oscillator. Various
throughput speeds are adjustable. Highly viscous liquids should be transported more
slowly to avoid air bubbles being transported along with them.
The factory setting values for the pump are as follows:
• Revolution speed: 50 rpm
• Pumping time: 10 s
• Anticlockwise rotation
1. Access the required method.
2. Select under METHOD > Tab Sampl. > EDIT.
3. Select Sample feeding DS7070.
The factory setting values are displayed.
135
Methods menu