Table of Contents
Advertisement
Installation
6.2.2
Standard connections for semi-automatic filling
6.2.3
Acid-resistant hoses for semi-automatic filling
The standard filling and draining hoses have a male Luer connector (1).
The hoses must be installed as follows:
1. Stick the filling hose into the infeed piece (1)
2. Stick the drain hose into the drainage piece (2)
1
Infeed piece consisting of PTFE with female Luer connectors.
2
Acid-resistant drainage piece
The acid resistant filling and draining hoses have a connector with an external thread (1)
and are screwed into the connecting pieces, which are also acid-resistant.
1
Acid-resistant hoses and connectors with external threading
38
1
2
Advertisement
Table of Contents
