14.3
Change the silica gel
14.4
Maintenance performed by Service
If the silica gel is discoloured, it can no longer absorb moisture and must be renewed.
1. Twist off the cartridge.
2. Fill the cartridge with silica gel.
3. Place the cartridge onto the drying unit and screw it on tight.
The density meter DS7000 does not require any regular maintenance performed
by Service. In the event of function disruptions, please contact:
A.KRÜSS Optronic GmbH
Alsterdorfer Strasse 276–278
22297 Hamburg / Germany
Tel.
+49 40 514317-0
Fax.
+49 40 514317-60
Web:
www.kruess.com
E-Mail: service@kruess.com
209
Maintenance and care