Table of Contents
Advertisement
7.3
Clean with peristaltic pump DS7070 and drying unit DS7050
5. Stop drying by pressing SySTEM > Tab Functions > Air pump STOP .
6. Remove the air hose from the frequency oscillator.
DS7050
filling tube
sample
Now measurement of samples can begin.
See the chapter System menu for how to assign functions to the keys.
After installation, before the first measurement is carried out on the device, the frequency
oscillator must be cleaned.
For this, a method must first be defined, in which the peristaltic pump and the cleaning
procedure are defined.
you have two options for performing cleaning:
• with individual functions
• with defined cleaning procedures
See the chapter Method menu > Tab Cleaning for how to define cleaning procedures.
47
air tube
waste tube
waste
Initial start-up
Advertisement
Table of Contents
