10.4
Network tab
Permission
This is the procedure
The following network settings are possible:
• IP address
• DHCP client
• Subnet mask
• Gateway
• LIMS device name
The network settings may only be modified by users with administrator permissions.
1. Press SySTEM > Tab Network > EDIT.
The function menu opens in edit mode:
Parameters
DHCP client
LIMS device name
155
Explanatory notes
dynamic: No additional input necessary. The IP
address is assigned automatically when a DHCP server
is active in the network.
static: Input:
• IP address
• Subnet mask
• Gateway
Input the device name for the LIMS
(laboratory information and management system).
The settings are accepted, the system menu is closed
and the start menu opens.
The system menu closes without saving the input and
the start menu opens.
System menu