kruss DS7000 Series User Manual page 72

Routine operation
This is the procedure
This is the procedure
1. Click on the line containing the name of the sample series >-Edit description-
2. Enter the name you want to assign and confirm with OK
In the Start sample series menu, you can also specify the first and last sample position to
be measured. Without further editing in the Configure sample series menu, the positions
on the sample plate of the autosampler are measured stepwise within these limits.
1. Click on the line containing the number of the first sampler position
2. Enter the first sample position and confirm with OK
3. Click on the line containing the number of the last sampler position
4. Enter the last sample position and confirm with OK
No negative values can be entered for the sample positions. In addition, all values must
be present on the currently installed sample plate. The maximum last sample position
is automatically detected and set at the start of the Start Sample Series menu as the last
sample position.
72