kruss DS7000 Series User Manual page 123

Step 4: Dry
Save cleaning procedure
4. Deactivate Auto-confirmation, in order that the cleaning procedure stops after 30 s
and can only continue with your confirmation.
5. Confirm the entry by pressing OK.
Once the cleaning solution has been sucked up, the frequency oscillator should be dried.
1. Press ADD.
2. Select the module type Dry.
3. Enter 20 s for Time.
4. Activate Auto-confirmation to begin the next step automatically once drying is
complete.
5. Confirm the entry by pressing OK.
1. Once the cleaning procedure is defined, press OK.
The dialog box is closed and the cleaning procedure is then available in the selection
menu.
123
Methods menu