Pause The Sample Series - kruss DS7000 Series User Manual

Routine operation
8.7.6

Pause the sample series

This is the procedure
2. Click on the line containing the name of the sample series
3. Then click on the check boxes next to the lock symbols of the previous sample series
you want to protect.
It is possible to pause an already running sample series and to edit all still to be
performed measurements of the sample series.
1. During a running sample series, click on the Cancel button.
2. A window with three buttons appears:
a. Continued: Closes the window and the sample series continues
b. pause sample series: Pauses the sample series and opens the Configure sample
series menu. In doing so, the currently measured sample will be finished first.
c. abort sample series: Cancels the sample series immediately
While the selection window is visible, the sample series continues to run in the
background.
If a sample series is paused, the Configure sample series menu opens.
In the paused state of the sample series, it is not possible to change the name of the
sample series.
In the paused state of the sample series, it is not possible to edit or delete rows of already
measured samples.
In the paused state of the sample series, it is possible to add and remove rows.
In the paused state of the sample series, it is possible to edit the samples ID of rows.
In the paused state of the sample series, it is possible to move rows.
If a sample ID is edited in the paused state, it is shown in italics.
The paused sample series can be continued by pressing the Start button. Thereby, no new
sample series will be saved in the circular buffer. This means that neither a new sample
series is created nor a sample series overwritten.
If the sample series is continued, the samples are measured according to the order within
the table.
76