Cleaning Tab - kruss DS7000 Series User Manual

Methods menu
Save cleaning procedure
9.8

Cleaning tab

4. Confirm the entry by pressing OK.
1. Once the cleaning procedure is defined, press OK.
The dialog box is closed and the cleaning procedure is then available for selection in the
menu METHOD > Tab Sampl. > Intermediate cleaning procedure .
Cleaning procedures under METHODS > Tab Cleaning are only for final cleaning.
The final cleaning is performed depending on the structure of the refractometer:
• With the peristaltic pump DS7070, the final cleaning is initiated viaSySTEM > Tab
Functions > Function: Cleaning starts.
• With the autosampler, final cleaning takes place automatically once the measurement
series is complete.
116