Filter Last Sample Series; Edit Existing Filters - kruss DS7000 Series User Manual

11.6.6

Filter last sample series

This is the procedure
Result
11.6.7

Edit existing filters

This is the procedure
The results in the last measured sample series can be displayed as follows.
1. Press RESULTS > FILTER > ADDITIONAL FILTERS...
2. Click on the tab Additional filters.
3. Click on EDIT.
4. Activate the check box Last sample series.
5. Confirm the entry by pressing OK.
The results of the last sample series are displayed.
Existing filters may be modified.
1. Press RESULTS > FILTER.
The filter selection dialog box will open.
187
Results menu