Table of Contents
Advertisement
Routine operation
8.2.4
Present the sample plate for the auto sampler
8.2.5
Begin measurement
8.2.6
Insert comment
1. Place the samples on the sample plate.
The start-up behaviour is different depending on whether temperature control is switched
on or not.
No temperature control!
If there is no defined set temperature, there is no temperature control and the
measurement can begin immediately.
If there is a significant temperature difference between the sample and the room
temperature, you should wait a moment before measuring. If the sample has not
yet reached the correct temperature, this shall lead to incorrect results.
1. Press the Measure key.
The measurement is taken.
If you have activated Comment under METHOD > Opt. , you can enter a comment after
pressing the Measure key:
62
Advertisement
Table of Contents
