Methods menu
Result
9.7
Sampl. tab
Open dialog box
3. Save the entry by pressing OK.
The alarm profile can then be selected in the method menu under tab Settings > Alarm
profiles .
If the measurement result exceeds the upper limit value of e.g. 42, the result is labelled
with ++++ in the results list.
If the measurement result is goes below the lower limit value, the result is labelled with ----
in the results list.
Under tab Sampl., the type of sample feeding with the associated settings is selected and
defined.
• Manually
• with DS7070
• with autosampler
1. Click on METHODS > Tab Sampl. > EDIT.
The selection menu for sample feeding is available:
108