Results menu
Result
11.4.2
Reset time period
This is the procedure
11.5
Filter results
11.5.1
Open filter menu
3. Click on START VALUE.
All results from this start value are displayed.
4. Double-click on the last result to be shown.
5. In the selection window, click END VALUE.
The results in the selected area are displayed.
The displayed results can then be printed using PRINT and exported using ExPORT
1. Press RESULTS > FILTER.
2. In the selection window, click RESET.
The period is reset and all results are displayed again.
If only certain results from the results list are to be shown, the results can be filtered
according to the following criteria:
• according to date and time (from - until)
• according to methods
• according to users
• according to text in comment field
• QC results only
• last sample series only
The defined filters can be saved and accessed again when required.
1. Press RESULTS > FILTER.
The filter menu will open.
180