10.6
Perform firmware update
Condition
This is the procedure
The new device software is sent to you by email.
1. Set up the "update" directory on your USB stick.
2. Add the files sent to you by email to the "update" directory.
Save result data!
The database can be overwritten during an update. All results are then deleted.
h Save and/or export your result data before the firmware update.
3. Press SySTEM > Tab Service > EDIT.
4. Press the key Firmware.
The Firmware Update dialog box will open.
5. Connect the USB stick with the new software to your device.
6. Press NExT.
The update selection dialog box:
165
System menu