Define Sample Feeding With Autosampler - kruss DS7000 Series User Manual

9.7.3

Define sample feeding with autosampler.

This is the procedure
Explanatory notes
Parameters/keys Explanatory notes
The settings are accepted, the method menu is closed and the
start menu opens.
The method menu closes without saving the entry and the start
menu opens.
Deletes the current method.
Creates a new method.
Sample uptake and the intermediate cleaning procedure must be defined for the
autosampler specific to method.
There are pre-defined factory settings. Where required, these can be copied and/or
modified.
The sample feeding is defined as follows:
1. Click on METHODS and select the method required.
2. Press tab Sampl. > EDIT.
3. Under Sample feeding Autosampler, select:
Parameters/keys
The following three parameters (pumping time, rotation speedand rotational
direction) are only used for sample uptake into the frequency oscillator.
Pumping time [s]
Revolution speed
[1/m]
Direction of rotation
111
Explanatory notes
Pumping time for sample uptake:
0 to 65535 s, default 10 s
Revolution speed of pump during sample uptake:
1 to 50 rpm, default 50 rpm
Direction of rotation of the pump:
• right > for sample uptake and pumping the sample out
• left > only for rinsing and drying
Methods menu