Results menu
11.6.5
Filter QC samples
Conditions
This is the procedure
Result
4. Select the required User, Method and/or Text in comment field.
5. Confirm the selection by pressing OK.
Only QC results should be displayed.
In order to be able to filter QC results, quality control must be activated under METHODS
> Tab Opt.
1. Press RESULTS > FILTER > ADDITIONAL FILTERS...
2. Click on the tab Additional filters.
3. Click on EDIT.
4. Activate the check box Quality control.
5. Confirm the entry by pressing OK.
The QC results are displayed.
186