Table of Contents
Advertisement
Methods menu
4. Confirm the entry by pressing OK.
After the pause, the cleaning solution should be rinsed out of the frequency oscillator with
Step 3:
Sampler: rinse
water and sucked empty.
1. Press ADD.
2. Under Module type, select the module Sampler: Rinse.
3. Enter for Time30 s, Rotation anticlockwise, rpm 50.
4. Activate Auto-confirmation to begin the next step automatically after 30 s.
5. Confirm the entry by pressing OK.
Step 4: Dry
Once it has been emptied completely, the frequency oscillator should be dried and then
the next step (sample uptake) should begin automatically.
1. Press ADD.
2. Enter for Time20 s.
3. Activate Auto-confirmation to begin the next sample automatically after the cleaning
procedure is complete.
115
Advertisement
Table of Contents
