Measure Previous Sample Series; Protect Sample Series - kruss DS7000 Series User Manual

8.7.4

Measure previous sample series

This is the procedure
8.7.5

Protect sample series

This is the procedure
This makes it possible to enter the barcodes of several samples without putting the
barcode scanner down.
It is possible to measure previous sample series. These past sample series can be restarted
directly or edited and started.
Previous sample series can be recalled within the Start sample series menu or in the
Configure sample series menu.
In the Start sample series menu, the first and last sample position of previous sample
series cannot be changed.
In the Configure sample series menu, all editing can be performed without restrictions.
Recalled previous sample series contain all entries and changes (measuring sequence,
sample ID, ...) of the previous sample series.
Previous sample series are listed in the drop-down menu under the name of the sample
series below the entry -Edit description-.
The previous sample series are sorted according to the time of their last call. The most
recently accessed previous sample series is at the top of the list.
1. Click on the line containing the name of the sample series
2. Click on a previous sample series
All entries and changes of the current sample series (measuring sequence, sample ID, ...)
are discarded when a previous sample series is recalled.
A total of 8 previous sample series are stored in a circular buffer. If 8 previous sample
series are stored and a new previous sample series is recorded, the oldest previous
sample series is removed.
The recording of a sample series is carried out by confirming the button Start in the
Configure sample series menu.
If a previous sample series is recalled and edited, but the name of the sample series is not
changed, a confirmation to overwrite the previous sample series is needed, when the Start
button is pressed.
Confirm with Yes overwrites the previous sample series with the new sample series.
Cancel with No displays the Configure sample series menu again.
If a previous sample series is recalled, edited and the name of the sample series has been
changed, this request does not occur.
In the Start sample series menu and Configure sample series menu, the currently edited
and all previous sample series can be protected.
Protected sample series cannot be overwritten and they are not removed from the circular
buffer.
Protected sample series remain in the system until the user removes the protection status.
At any given time, only 5 protected sample series can be present in the system.
A checkmark next to the lock symbol in the name of the sample series identifies a sample
series as protected.
Protected sample series are listed directly under the entry -Edit description-.
1. Click on the check box next to the lock symbol to protect the currently edited sample
series.
75
Routine operation