Table of Contents
Advertisement
Explanatory notes
Define temperature control
Result
9.6
Settings tab
Open dialog box
Temperature control
Target temperature
Required temperature entry.
Tolerance [°C]
Enter the permitted temperature difference from the required
value that the measurement can be started with.
Stabilisation [s]
The measurement begins once the stabilisation period is
complete.
1. Click on METHODS > Tab Temp. > EDIT.
The temperature control dialog box opens.
2. Select Temperature control on.
3. Enter the target temperature tolerance and stabilisation period.
4. Save the entry by pressing OK.
For the next start of this method, the current temperature is constantly checked and
regulated.
For each method, the following measurement settings can be defined.
• Measurement mode
• Alarm profiles
1. Click on METHODS > Tab Settings
The measurement settings dialog box will open.
101
Methods menu
Advertisement
Table of Contents
