Clean With Peristaltic Pump Ds7070 And Drying Unit Ds7060; Clean Frequency Oscillator With Individual Functions - kruss DS7000 Series User Manual

Initial start-up
7.4

Clean with peristaltic pump DS7070 and drying unit DS7060

7.4.1

Clean frequency oscillator with individual functions

1. Remove the air hose from the frequency oscillator and connect the drainage hose.
2. Clean the filling hose, if needed, from the outside and hang it in the sample to be
measured.
you have two options for performing cleaning:
• with individual functions
• with defined cleaning procedures
See the chapter System menu for how to assign functions to the keys.
Rinse 1. Fill a rinsing vessel with the rinsing solution or distilled water and hang the filling hose
in the rinsing vessel.
2. Place the waste vessel underneath the waste hose.
air tube
DS7050
drain tube
filling tube
sample
connecting tube
DS7060
drain tube
filling tube
rinsing liquid
52
waste tube
waste
waste tube
waste