Command Line Interface Reference for the ProSafe 7300S Series Layer-3 Stackable Switches,
14.3.5.1 no ip irdp minadvertinterval
This command sets the default minimum time to the default.
Format
Mode
14.3.6 ip irdp preference
This command configures the preferability of the address as a default router address,
relative to other router addresses on the same subnet. The range is -2147483648 to -1 to 0
to 1 to 2147483647.
Default
Format
Mode
14.3.6.1 no ip irdp preference
This command configures the default preferability of the address as a default router
address, relative to other router addresses on the same subnet.
Format
Mode
14.3.7 show ip irdp
This command displays the router discovery information for all interfaces, or a specified
interface.
Format
Modes
Interface
Ad Mode
Advertise
Address
14-22
no ip irdp minadvertinterval
Interface Config
0
ip irdp preference <-2147483648-2147483647>
Interface Config
no ip irdp preference
Interface Config
show ip irdp {<unit/slot/port> | all}
Privileged EXEC
User EXEC
Shows the
<unit/slot/port>
Displays the advertise mode, which indicates whether router
discovery is enabled or disabled on this interface.
Displays the IP address to which the interface sends the
advertisement.
v1.0, March 2006
.
Routing Commands