Show Policy-Map Interface - NETGEAR ProSafe GSM7228PS Cli Manual

Term Definition
DiffServ Admin The current setting of the DiffServ administrative mode. An attached policy is only active
Mode
on an interface while DiffServ is in an enabled mode.
The following information is repeated for interface and direction (only those interfaces configured
with an attached policy are shown):
Term Definition
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
OperStatus The current operational status of this DiffServ service interface.
Policy Name The name of the policy attached to the interface in the indicated direction.

show policy-map interface

This command displays policy-oriented statistics information for the specified interface and
direction. The <unit/slot/port> parameter specifies a valid interface for the system.
Note: This command is only allowed while the DiffServ administrative mode is enabled.
Format
show policy-map interface <unit/slot/port> [in]
Mode Privileged EXEC
Term Definition
Interface Valid slot and port number separated by forward slashes.
Direction The traffic direction of this interface service.
Operational The current operational status of this DiffServ service interface.
Status
Policy Name The name of the policy attached to the interface in the indicated direction.
The following information is repeated for each class instance within this policy:
Term Definition
Class Name The name of this class instance.
Quality of Service (QoS) Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
6-31