INFORMATION DISPLAYS
9.1
User preference settings (i200)
Date & time (i210)
32 Planmeca ProMax 3D s / 3D
Touch User preference settings (i200) on Information
Displays. The display shown below appears.
NOTE The time is set to the local time at the factory. Change
the time setting to show the correct time before you
start using the X-ray unit.
To set the time select Set time on the Date & time display
(i210). If you want to change the date, select Set date.
The option Date & time display format allows you to select
the format you wish to use for displaying date and time.
User's Manual (3D)