User Preference Settings; Setting Date And Time - Planmeca ProMax Technical Manual

USER PREFERENCE SETTINGS

2 USER PREFERENCE SETTINGS
From the list of Information displays select User preference settings (i200). In this mode you
can set the date and time, perform visual adjustments and select the unit's behavioural pref-
erences and language.
Figure 2

2.1 Setting date and time

The clock is set at the factory to local time and it should be set to show the correct time/date
before using the unit.
To set time select Set time on the Date & time display (i210). If you want to change date,
select Set date. If you want to change the time and date display format, select Time & Date
display format.
Figure 3
Technical Manual
Chapter B - INFORMATION DISPLAYS
Planmeca ProMax B-3